We are a forward-thinking, visionary, Tennessee-based startup with a growing team of innovators, manufacturers, and designers. We exist to develop tools to make 21st century small farms more efficient and profitable.
The Hudson Valve should be routinely cleaned to maintain optimal performance. Depending on your water source, cleaning should take place between 2 – 6 times per year. The more silt, rust, debris, etc. in your water, the more often you need to clean the valve. Moss, algae and other debris can clog the small holes that run through the valve causing it to stop working properly. Follow these steps for optimal performance.
Manual or automatic valve with 35 psi pressure regulator
Flow per Sprinkler Line (GPM)
Pressure Regulator at 35 psi
Flow Range: 5 to 17.6 gpm
Supply Line Requirements
3⁄4″ diameter or greater supply line works best
1″ diameter or greater supply line works best
Water Pressure Requirements
At least 30 psi
Automatic Irrigation Controller
Power supply: 9‑volt battery, included
Once a day at the same time every day. (Factory preset 15 minutes at 6:00 am)
Once a day at the same time on selected active days
Up to three start times per day on selected days
Stop all irrigation activities
Manually start a program with option to manually or automatically stop active program
Backup: On-board flash memory to safeguard settings
Operating Temperature: 32° – 122°F (0° – 50°C)
Storage Temperature: 14° – 140°F (-10° – 60°C)
Pivot Pro Knife Sharpener
Innovative Pivot Response Technology makes sharpening easier and more precise by allowing the abrasive to follow the curve of the blade when sharpening. It creates a sharp and consistent edge along the entire length of the blade. Pivot Response Technology is available in two ways: Convex Carbides and Bench Stones.
Work Sharp’s exclusive Convex Carbide sharpening system creates a superior convex edge profile quickly and easily. Convex edges cut smoother and hold their edge longer. Our Convex Carbides also provide the innovative Pivot Response Technology. This allows the carbides to follow the curve of the blade when sharpening and provides increased control of material take off to restore a sharp edge quickly. Pivot Response can be locked out to provide less material take off for quickly restoring a lightly dulled edge. Work Sharp’s innovative technologies allow you to take more control of the sharpening results you want, without adding complexity. Our engineered simplicity puts the skill into the tool, so you get sharper edges faster.