Sabbath
The store will re-open on .
Support Resources
Click on a product name below view support resources and technical specifications about that product.
1-in Hudson Float Valve
Installation Instructions
Download PDF ↓
128.323 KB
Specifications
Thread Female: 1.0″
Height: 5.0″
Diameter: 3.75″
Operating Pressure: 4 – 100 psi
Optimal Operating Pressure: 8 – 100 psi
Flow Rate: Approx. 80% of flow supplied to valve
Max Fluid Temp: 175° F
Maintenance
The Hudson Valve should be routinely cleaned to maintain optimal performance. Depending on your water source, cleaning should take place between 2 – 6 times per year. The more silt, rust, debris, etc. in your water, the more often you need to clean the valve. Moss, algae and other debris can clog the small holes that run through the valve causing it to stop working properly. Follow these steps for optimal performance.
Caterpillar Tunnel Instruction Manual
14-ft wide Tunnel Instruction Manual
Download PDF ↓
10.076 MB
16-ft wide Tunnel Instruction Manual
Download PDF ↓
10.063 MB
CoolBot
Quick Start Guide
Download PDF ↓
319.077 KB
Instruction Manual
Download PDF ↓
565.256 KB
Spec Sheet
Download PDF ↓
849.575 KB
CoolBot Pro with WiFi
Quick Start Guide
Download PDF ↓
625.79 KB
Instruction Manual
Download PDF ↓
1.364 MB
Spec Sheet
Download PDF ↓
200.629 KB
Do-It-Yourself Greens Blower Kit
Assembly & Instruction Manual
Download PDF ↓
915.213 KB
Air Blower Operation Manual
Download PDF ↓
1.718 MB
Drip Irrigation
Assembly Video
Assembly & Instruction Manual
Download PDF ↓
3.557 MB
Light-duty drip tape data sheet
Download PDF ↓
1.208 MB
Heavy-duty drip tape data sheet
Download PDF ↓
1.046 MB
Wall Thickness
Light-duty
8‑mil
Heavy-duty
25-mil
Max. Pressure
17.5 psi
41.0 psi
Inner Diameter
0.638 in
0.636 in
Emitter Spacing
12 inches
Flow Rate
0.23 gallons per hour at 10.0 psi
0.42 gallons per hour at 10.0 psi
Field Irrigation
Assembly & Instruction Manual
Download PDF ↓
3.557 MB
Sprinkler Design System Guide
Download PDF ↓
1.909 MB
Wobbler Features
- Counter-balance reduces vibration for a smooth, stable performance
- Only one moving part – which translates to longer life
- Connections: 3⁄4″ or 1⁄2″ NPT male
- Flow rates: 0.78 to 6.97 gpm (177 to 1583 L/hr)
- Operating pressures: 10 to 25 psi (0.69 to 1.72 bar)
- Low wind drift and evaporative loss at low pressures
- Two-year warranty on materials, workmanship and performance
- Color-coded nozzles for easy size identification. Warranted to maintain correct orifice size for five years
Wobbler Data Sheet
Download PDF ↓
172.408 KB
Meganet Features
- Perfectly balanced sprinkler with two equal water jets — no wobble.
- Robust design is closed and compact preventing insect penetration and protecting internal parts.
- Excellent distribution uniformity.
- Install on solid sets or in removable field stands.
- Each unit has an individual filter for nozzle cleanliness and to simplify cleaning.
- Color-coded for easy identification.
- UV protected materials are durable in all climates.
- Resistant to fertilizers and chemicals.
- Optional MegaStand™ for leak-proof connection to FlexNet™ flexible pipe.
Meganet Data Sheet
Download PDF ↓
1.677 MB
Field Irrigation Kit
Harvester Instruction Manual
Instruction Manual
Download PDF ↓
1.73 MB
MegaNet Green Sprinkler Head
Features
- Perfectly balanced sprinkler with two equal water jets — no wobble.
- Robust design is closed and compact preventing insect penetration and protecting internal parts.
- Excellent distribution uniformity.
- Install on solid sets or in removable field stands.
- Each unit has an individual filter for nozzle cleanliness and to simplify cleaning.
- Color-coded for easy identification.
- UV protected materials are durable in all climates.
- Resistant to fertilizers and chemicals.
- Optional MegaStand™ for leak-proof connection to FlexNet™ flexible pipe.
Spec Sheet
Download PDF ↓
1.677 MB
Overhead Irrigation
Assembly Video
Assembly & Instruction Manual
Download PDF ↓
3.557 MB
In the Box
50-ft
Filter Assemblies (Optional)
Screen or disc filters
Valve/Pressure Regulator Assemblies (Optional)
Manual or automatic valve with 35 psi pressure regulator
Flow per Sprinkler Line (GPM)
50-ft
4.9 gpm
100-ft
9.8 gpm
Pressure Regulator at 35 psi
- Flow Range: 5 to 17.6 gpm
- Unit Size:3⁄4″
Supply Line Requirements
50-ft
3⁄4″ diameter or greater supply line works best
100-ft
1″ diameter or greater supply line works best
Water Pressure Requirements
At least 30 psi
Automatic Irrigation Controller
- Power supply: 9‑volt battery, included
- Programs:
- Once a day at the same time every day. (Factory preset 15 minutes at 6:00 am)
- Once a day at the same time on selected active days
- Up to three start times per day on selected days
- Extra modes:
- Stop all irrigation activities
- Manually start a program with option to manually or automatically stop active program
- Backup: On-board flash memory to safeguard settings
- Operating Temperature: 32° – 122°F (0° – 50°C)
- Storage Temperature: 14° – 140°F (-10° – 60°C)
Pivot Pro Knife Sharpener
Technology
Pivot Response™
Innovative Pivot Response Technology makes sharpening easier and more precise by allowing the abrasive to follow the curve of the blade when sharpening. It creates a sharp and consistent edge along the entire length of the blade. Pivot Response Technology is available in two ways: Convex Carbides and Bench Stones.
Convex Carbide™
Work Sharp’s exclusive Convex Carbide sharpening system creates a superior convex edge profile quickly and easily. Convex edges cut smoother and hold their edge longer. Our Convex Carbides also provide the innovative Pivot Response Technology. This allows the carbides to follow the curve of the blade when sharpening and provides increased control of material take off to restore a sharp edge quickly. Pivot Response can be locked out to provide less material take off for quickly restoring a lightly dulled edge. Work Sharp’s innovative technologies allow you to take more control of the sharpening results you want, without adding complexity. Our engineered simplicity puts the skill into the tool, so you get sharper edges faster.
Sharpening Angles
25°
Sharpens
- Outdoor Knives
- Kitchen Knives
- Serrations
- Scissors
- Lawn & Garden Tools
- Camp Tools
Pyroweeder
Assembly Video
Assembly & Instruction Manual
English
Download PDF ↓
4.731 MB
Español
Download PDF ↓
4.658 MB
Manifold
30-inch model
5 Burners
Upgradable to 8 Burner
48-inch model
8 Burners
Burner Diameter
2 inches
Burner Angle
90°+ adjustment
Burner Height
50° adjustment
Handle Angle
35° adjustment
Tool Cart Ground Clearance
Adjustable to either 6 ¾” or 10 ¾”
Swap and invert axle assemblies to increase cart height
Track Width
30-inch model
Expandable from 31″ – 38″ inside wheel width
48-inch model
Expandable from 42″ – 54″ inside wheel width
BTU Output
30-inch model
300,000 BTUs at 25 psi
48-inch model
480,000 BTUs at 25 psi
Pyroweeder Flame Blade Accessory
Instruction Manual
Download PDF ↓
308.244 KB
Quick-cut Greens Harvester
Instruction Manual
Download PDF ↓
1.73 MB
Power Source
Cordless drill (not included)
Cutting Path Width
15″ wide
Shipping Dimensions
20″ × 26″ × 6″
Shipping Weight
10 pounds
Silage Tarp
Cutting Integrity
Cutting the silage tarp will not fray the edges or compromise the integrity. Learn more.
Shipping Size and Weight
24' × 105'
Width: 9 inches
Height: 9 inches
Length: 46 inches
Weight: 61 lbs
32' × 105'
Width: 9 inches
Height: 9 inches
Length: 60 inches
Weight: 83 lbs
40' × 105'
Width: 9 inches
Height: 9 inches
Length: 70 inches
Weight: 99 lbs
50' × 105'
Width: 9 inches
Height: 9 inches
Length: 86 inches
Weight: 124 lbs
Material
100% Low Density Polyethylene (LDPE). It does not contain Polyvinyl Chloride (PVC).
Life Span
365 sunny days on both sides. Learn more.
UV Treatment
Both sides. Learn more.
Thickness
5 mil
Trellising Kit
Installation Video
Trellising Kit Installation Guide
Download PDF ↓
710.406 KB
Two-Tank Pyroweeder Upgrade
Instruction Manual
Download PDF ↓
566.232 KB
XCEL Wobbler Sprinkler Head
Features
- Counter-balance reduces vibration for a smooth, stable performance
- Only one moving part – which translates to longer life
- Connections: 3⁄4″ or 1⁄2″ NPT male
- Flow rates: 0.78 to 6.97 gpm (177 to 1583 L/hr)
- Operating pressures: 10 to 25 psi (0.69 to 1.72 bar)
- Low wind drift and evaporative loss at low pressures
- Two-year warranty on materials, workmanship and performance
- Color-coded nozzles for easy size identification. Warranted to maintain correct orifice size for five years
Spec Sheet
Download PDF ↓
172.408 KB